FloPlast's WRAS approved MDPE Systems are suitable for use below ground on cold water services with polyethylene pipes manufactured in accordance with the requirements of BS EN 12201 - 2 (BLUE).
The 'Supreme' range offers everything you could ask of a compression fitting.
- High Impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
- The fittings have a co-polymer polypropylene Body, Body Nut and Guide Ring, Acetal Grab Ring and Nitrile Seal.
-
Maximum operating pressure is 16 bar for 20mm pipe. All other sizes are 12.5 bar.
-
Tested and approved by various testing institutes worldwide.
-
Water Regulatons Advisory Scheme Approved (WRAS) product. 20mm to 63mm range of fittings.
-
All the ‘Supreme’ range of fittings are WRAS approved to resist pressure up to 16 bar.
-
Simple and quick to connect:
-
to fit the pipe you don’t need to dismantle the connector
-
you don’t need to chamfer the pipe
-
you won’t lose any pieces on the job site
-
no time wasted; just cut the pipe, insert pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done!
-